4 Problems That Call For A Water Heater Repair Service

Posted on: 18 October 2022

Is your water heater becoming inconsistent in providing hot water? If you have a traditional water heater with a tank, you might see a few problems as the water heater grows old. While leaks are probably the most common problem with these heaters, there are a few other problems that need fixing by a water heater repair service.

1. Rusty Water  

One problem that can occur with traditional water heaters is a rusty tank. This is usually due to the accumulation of minerals in the water, leading to corrosion. First, the technician flushes the tank to remove any accumulated sediment.

They will also add a rust-inhibiting agent to the water to help prevent further corrosion. If the problem is severe, you may need to replace the entire water heater. However, by taking these proactive steps, you can often extend the life of your water heater and avoid having to deal with a rusty tank.

2. The Water Heater Makes Strange Noises

Firstly, sediment might have built up at the bottom of your water heater tank and is now boiling. This can create a rumbling noise you'll want to check out. If this is the case, you'll need to flush out your water heater to eliminate the sediment.

Another possibility is that there could be a problem with the heating elements in your water heater. If they've become corroded, they might make noises as they heat the water. In this instance, you'll need to replace the heating element. Lastly, your water heater tank may be starting to corrode. The water heater repair service might recommend the replacement of the water heater.

3. The Water From the Heater Is Too Hot or Not Hot Enough

First, check the thermostat to ensure it's set to the right temperature. If it is, the next step is adjusting the water heater's inlet valve. This valve controls the amount of water that flows into the tank, so if it's turned too far in one direction, it can cause the water to be either too hot or too cold.

4. The Water Heater Takes Too Long to Heat Up

First, the water heater's inlet valve may not be open all the way, restricting the flow of water into the tank and lengthening the heating time. Another possibility is that the heating element might be going bad and need to be replaced. Lastly, if the water heater is too old, it may simply be time for a replacement.

A faulty water heater can be very inconvenient, not to mention energy-wasting. But regular maintenance will keep it going for the expected lifespan. Call water heater repair services to learn more.

Share